FAST-ACT® Liquid Decon is a proprietary formulation of high-performance specialty materials effective at neutralizing a wide range of chemical agents. FAST-ACT® Liquid Decon has been specially formulated to provide decontamination capabilities against a broad spectrum chemical residues without the use of harsh chemicals. FAST-ACT® is a non-toxic, non-corrosive, non-flammable liquid formulation effective against a wide range of toxic chemicals. FAST-ACT’s® efficacy against such a wide range of chemical hazards is due to the high surface area, large porosity, small crystallite sizes, defect sites, and electronically altered chemical structure of its metal oxide and metal hydroxide components. The FAST-ACT® Liquid Decon formulation is safe and significantly reduces both liquid and solid chemical residues. Since FAST-ACT® neutralizes chemical threats quickly, on-site incident management, threat of exposure to residual chemical, and clean up times are reduced. FAST-ACT® works quickly to significantly reduce hazards associated with common chemicals including: acids, organic compounds, phosphorus and sulfur compounds, and even drug lab chemistries. FAST-ACT® Liquid Decon can also be used against a wide range of organic compounds such as alcohols, aldehydes, chlorocarbons, and petrochemicals. used against acid compounds to suppress vapors in addition to liquid neutralization.
The product is a ready to use formulation that can be used as is or diluted when the contamination levels are low and more area needs to be covered. FAST-ACT® Liquid Decon can be delivered to the contaminated area using several methods of deployment. In the event of a chemical spill or surface contamination, the FAST-ACT® Liquid Decon can be manually placed onto the hazards, sprayed, or wiped. The product can be directly applied to surfaces or sprayed from a hand-pressurized sprayer and those powered by compressed air. If both liquid and vapor hazards exist, a liquid spray application can be employed so that the formulation will have an opportunity to neutralize any vapor threat and still be directly applied to the surface contamination.
The FAST-ACT® Liquid Decon product uses the same advanced technology that was developed for the original FAST-ACT® line of sorbent powder decon products (mitts, cylinders, shakers, pails) that have been helping responders neutralize liquid and vapor hazards for over a decade. By adapting the technology to a liquid form, this expands the utility of the product family to be able to contain and or neutralize a wide range of chemical residues.
Options: 1 Gallon and 1/2 Gallon
Quantity: 1 Each or by the Case; 1 Gallon Case contains 4 Gallons, 1/2 Gallon Case contains 6- 1/2 Gallons
FAST-ACT® Liquid Decon Details
- Effective against a wide range of toxic chemicals including, Acids, Halogenated compounds, Phosphorus compounds, and Organic compounds
- Rapid-acting upon contact
- Life-safety threat reduction
- Reduces on-site management time and cost
- Non-toxic, non-corrosive, non-flammable
- Easy to operate delivery systems
- Ready to use
- Compact forms for easy storage
- No special training required
- Effective over a wide range of environmental conditions; Above freezing to 185ºF (85ºC)
- 5 year shelf life
For the full Technical Report on FAST-ACT® Liquid Decon Click Here